Thursday, September 10, 2009

Midterm Study Image 2009/7 Roman Arretine ware


Roman Arretine ware, red slip earthenware, mold-made footed bowl, 1c BCE-1 c CE

Stemmed bowl, krater, Roman, from Arezzo. Earthenware, red gloss ware, decorated in relief with rows of beads, wreaths, rosettes and figures which represent the seasons. Signed by potter Cb. Ateius. Height 18.7 cm.

Red Gloss Wares: begin with Augustan/Imperial age, influenced by Hellenistic designs (figures in relief, scrolls, garlands, floral designs—black-slipped Megarian ware), often produced by Greek workers (have signature seals, industry records). Red gloss slip easier to fire than black—called terra sigillata—from sigillum (seal)--stamped designs. As with Greeks, made elaborate embossed and incised molds from plaster and fired clay—threw clay inside molds, feet, rims etc. added separately.Roman factories were able to impose standardization through the use of fine, calcareous clays that fired to a consistent quality over a range of temperatures ranging from 850-1050 degrees C common to wood fired updraft kiln. The decoration was achieved through impressing the designs onto the interior of a mould, and the vessel was then thrown in the mould which was mounted on a potter's wheel. This production technique allowed vessels to be produced uniformly in large numbers, usually by workshops in which ten to fifteen potters worked simultaneously.Glossy surface is achieved by use of a very fine slip oxidized to sealing-wax red. Micrograph of sherd of Eastern Gaulish sigillata shows open, partially-vitrified body and vitreous slip. The two adhere well with the resulting tough “non-stick” surface that made this ware popular for the table. (PMCT p.191)

Midterm Study Image 2009/6 Bronze-Age Britain


England, Group of Bronze-Age vessels, Urns and Beakers c. 1500-1000 BCE. 20cm.

Late Iron Age cremation burials in Britain.

Bronze Age pottery from Britain, showing a wide range of surface colours, dependent upon firing conditions. To the left are two globular urns. One is oragne and oxidised, showing a blackened area through contact with the fuel. The other is heavily smudged, due to carbon deposited in reduction. The beakers to the right show a range of incised and impressed decoration; once again, the firing effects are highly variable.One of the major changes that took place in the last 150 years of the Iron Age in Britain was that people in south-eastern England began to use new funeral rituals. People were cremated and buried in a grave along with pots, food and other items. Often the graves were in a small cemetery. This type of funeral rite was the same as that used by people who lived in north-east France (Gallo-Belgica) at this time. Many of the Iron Age British objects in The British Museum come from the excavation of these cremation graves. The grave goods were placed in the grave for the dead person to use in the next life. Most of the objects are connected with dress and appearance or with eating and drinking. They include brooches, mirrors and personal hygiene sets with items such as nail cleaners and tweezers. The grave goods also include cups, beakers, flagons and plates. Offerings of food and, perhaps, drink were also given.The more important the person's family was, the more grave goods were placed in the grave. Important families also placed rarer and more costly items in graves, such a foreign pottery, wooden 'buckets', mirrors, metal vessels made in Roman Italy and complete amphorae of wine. The graves from Welwyn, Welwyn Garden City and Hartford Heath are examples of burials of the most important ruling families. Graves such as those from Aylesford, Alkham and the grave from King Harry Lane shown here were those of middle ranking families. The poorest families could only bury their dead with, perhaps, just one locally made pot or a single brooch.

Midterm Study Image 2009/4 Gerzean Ware


Pre-Dynastic Egypt, Gerzean ware . Late Predynastic period. (Naqada II), 3600-3250 BCE

Pot decorated with a boat Height: 22.900 cm Width: 20.200 cm (max.)

The pink colour of the fabric of this vessel is typical of the marl clay obtained from the desert areas of Egypt. Vessels with rounded or tapered bases were common in the Predynastic period, and occurred throughout Egyptian history. These pots were supported on a stand or were placed in a depression made in the sand.The exterior is decorated with stylized representations in red ochre paint. The simple abstract patterns and spirals of the earliest examples were probably imitating vessels made of a hard stone such as breccia. The multiple wavy lines around the neck of this example, may represent water.The motifs used in later scenes include birds, animals, people and boats. The stylized boat on this vessel is typical of this period. It has a basic long curved shape, with strokes coming off it to represent oars. The two structures in the centre are probably cabins or shrines, one with an emblem like the later standards that represented different districts. Human figures are sometimes depicted near the cabins. These are often women, who are interpreted as dancers because they have their arms raised above their heads

Midterm Study Image 2009/3 Predynastic Egypt


Pre-Dynastic Egypt. Burnished black-topped redware jar. Late Predynastic period, Naqada II, around 3200 BC 31.5 x 17.7 cm.

A container for food for the Afterlife? From a tomb at Abydos, Egypt. These black-topped redware jars are characteristic of the finewares of the later Predynastic period. Burials of the late Predynastic period contain vessels of both fine and coarse wares. Even burials in the cemeteries of the poor often contained a black-topped vessel. They were perhaps filled with food for the Afterlife. The pots were made by coiling ropes of clay to build jars, bowls and bottles. The inside and outside of the vessel were smoothed and red ochre slip was applied. This produced a red colour if enough oxygen was available in the kiln. The black top was achieved by placing the vessel upside down in the kiln, so that the ashes of the fuel stopped oxygen reaching the slip. This resulted in a black colour. The vessel was burnished (polished using a hard object, like a pebble) to produce a shiny finish. Archaeological evidence from Hierakonpolis shows that fineware vessels were fired in special kilns, located in the desert valleys close to the source of the clay used to make them. Potters seem to have specialized in either coarse or fine pottery. The 'crescent-thumb' potter, so-called after his maker's mark, produced only coarse ware vessels. He lived and worked close to his clay source, setting out his wares in front of his house.

Midterm Study Image 2009/2 Hassuna Period


Mesopotamia, Hassuna Period, Painted bowls from Samarra c. 6300-6000 BCE.


Proto-Hassuna not that well fired--black core indicates 600-700 degrees C. for one hour, likely in bonfires (no evidence of kilns found). Produced in small villages. Hassuna ware fired better--vestigial kilns--sunken firebox, clay grate, wares separated from fire, sloping stoke hole--upper part likely temporary (piled pot shards etc.) Kilns clustered away from houses in separate district. We don’t know who made them. Samarra ware 6300-6000 BCE--central Mesopotamia--towns enclosed by ditch--extended families--houses up to 14 rooms. Labour coordinated for irrigation etc.--settlements self-sufficient in ceramics--lots of kiln sites, wasters, 850-1050 Celsius. Decoration in red or black or bichrome imitates textiles, basketry, whirling style, bulls etc. Breakage repaired--valuable, but not as valued as stone vessels (found in graves). Some potters’ marks indicate existence of limited trade--pots found around region. There seems to be little agreement about the exact dates of the Samarra culture as well as its precise cultural and ethnic makeup. Extensive evidence of irrigation indicates investment in crop farming, permanent settlements and complex social organization. Samarra culture is noted for its fine painted pottery decorated in dark coloured backgrounds with figures of animals - birds - people and geometric designs. This type of pottery was first recognized at Samarra but was thought to be a southern variant of the Hassuna Culture. It now seems Samarra was roughly contemporary with late Hassuna and early Halaf culture, which built over Hassuna sites. Some archaeologists believe Samarran colonization of the southerly lowland area led to the development of the later Ubaid culture (which later absorbed Halaf to the north.)

Midterm Study Images 2009/1 Hacilar, Turkey


Haçilar, Turkey. Earthenware pots, hand-built, decorated c. 5000 BCE.


Possibly from Hacilar, modern TurkeyThis painted jar, shaped like a female figure, is similar to a type of pottery found at Hacilar, excavated by James Mellaart between 1957 and 1960. The potters at this site were able to produce high-quality wares with beautifully executed, bright geometric designs. The ceramics were well shaped and were evenly fired. Along with jars and bowls, clay female figurines were common. However, the only vessels of this type excavated at Hacilar were much larger and fragmentary.Pottery workshops were found in a earlier level at Hacilar, in the village centre. Grindstones were used to break up the natural pigments of red and yellow ochre for colouring the pottery. Alongside them were cups of paint, storage areas for the clay and modeling tools, and unpainted but burnished pottery. No kilns were discovered and the firing may have taken place outside the settlement. This type of pottery has also been found at other sites in western Anatolia, and at Mersin, on the south-east coast of Turkey.By the beginning of the fifth millennium BC, Hacilar had been abandoned, and with the end of the settlement came an end to the fine pottery tradition. Height: 11.5 cm Width: 6.7 cm.

Thursday, July 16, 2009

Hello All,
After a year in which the course did not run, I am again looking forward to teaching the History of Ceramic Practice at ECU again! I will leave much of the blog from 2007 in place but will post the new course outline, new test images and other material as the fall approaches. I look forward to meeting my new students and learning more about their interest and hopes for this course. Stay tuned!
Amy