Thursday, September 10, 2009

Midterm Study Image 2009/5 Shabti



Egypt, Shabti with Coffin, 19th-20th Dynasty, (c. 1307-1070 BCE. faience, 7cm.

Faience was known in Mesopotamia, Near East and Egypt to make beads and other luxury goods. Faience was an easily worked using molds and could be used to copy soapstone (in short supply), semi-precious stones and metals. Quartz pebbles were ground, mixed with alkali, molded and fired to resemble gems. Minerals added included copper (turquoise), cobalt (lapis lazuli). The alkali salts in the material caused the minerals to migrate to the surface, producing a "self-glazing" colored material. Sometimes clay was added to enhance plasticity, but rarely in Egypt. Ushabtis were placed in tombs as "helpers."--often with sickles to cut grain, perform duties for dead pharaoh. Other common uses for faience included votive objects for Goddess Hathor--chalices, lotus motif.
Please note: this image is out of sequential order--I decided on it a bit later and can not seem to insert it into its proper place. It should be pretty easy to figure out!

Midterm Study Image 2009/13 Ayanaar Horse


Tamil Nadu, India. Ayanaar horse, terra cotta, life size, 20th c.

These magnificent life-sized sculptures of horses are made in the southern part of India in Tamil Nadu. They are fired in situ and can be as tall as 4 metres high. Making, firing and initiating these figures are all connected with spiritual rituals governed by tradition handed down for generations.Massive terracotta Horse. Environs of Puthur, Tamilnadu, South India. This fifty year old massive clay image was fired on site. Because the fired surfaces are porous a solution of oxides used as colorants are easily absorbed and thus made durable. Fifty years have altered them only slightly. Although the annual rains soak the porous clay, no harm results because Tamilnadu never freezes. In other climates water penetrating the clay could freeze and expand causing disintegration within a season.For more information, please see: http://www.ceramicstoday.com/articles/clay_horses.htm

Midterm Study Image 2009/12 Whistling Vessel


Peru, south coast. Double-chambered whistling vessel depicting an owl, , Early Middle Horizon (CE 650-750).

Most whistling vessels have been found in pristine shape in graves; forms often imitate particularly “vocal” animals such as parrots, owls, monkeys—whistle suggests their sounds.Stirrup spout or handle distinct feature throughout region and time. Pots take many forms, mold-made—animals, fruits, vegetables, sea shells, humans. Often greywares, smudged (not true reduction), coarse temper. Textiles in region highly developed—also work in gold, copper, silver. First whistling pots appear.

Midterm Study Image 2009/11 Moche Stirrup pot


Peru. Moche: Huari. Stirrup spout bottle in form of jaguar with captive warrior; Early Intermediate period, 300-600 CE.

Mochica (CE l00-1200)--most important, near Chicama river (north coast), related to other groups living in south by Nazca valley, Paracas. Outstanding plastic wares—eventually, most are mold-made, many nearly identical with some variety in finish—delicate stirrup spout, some with flat bridges, often in shape of human or animal head, dippers and corn poppers.

Midterm Study Image 2009/10 Lucy Lewis


New Mexico, Lucy Lewis, Rounded pot, earthenware/painted decoration c. 1970.

Lucy Martin Lewis (b Acoma Pueblo, NM, c. 1895; d 12 March 1992). Native American potter. As a child she made and sold Acoma polychrome pottery, which by 1900 had deteriorated into tourist wares such as vases and ashtrays, but in the 1930s she began working in the Acoma pottery tradition of the 19th century, making jars with a red-slip base and white-slip body that were decorated with the bird and flower motifs that had been common from c. 1880. In the 1940s she adapted designs from prehistoric ceramics: non-figurative motifs from Hohokam and Anasazi wares (5th–13th centuries) and figurative designs from Mimbres wares (10th–13th centuries). From the former she adopted repetitive fine-line patterning that covered the entire body of the vessel as well as ‘negative’ patterns in white slip against a black painted background with occasional orange accents. Working in the coil-and-scrape method with the dense grey clay of the Acoma area tempered with ground potsherds, Lewis produced miniature pots, seed jars, bowls, animal effigies and water jars, all rarely more than 250 mm in height. Several coats of white slip were applied, and each coat was polished with a wet stone until the slip was opaque. Paints made from ground minerals with a binder of boiled vegetal matter were applied with a chewed yucca-leaf brush. The vessels were then fired outdoors using dried cow dung. Until her death she continued to work at her home in McCartys, NM, assisted by her daughters. (From Groves Art Online)Lucy Lewis is regarded as the matriarch of Acoma pottery and alongside Maria Martinez, is one of the best known Southwestern potters. She started making pottery around the turn of the century, continuing a tradition dating back hundreds, if not thousands of years. Pottery of the Southwest was generally coil built, molded or modelled and low-fired. Lucy derived her designs - painted on with colored slips - from shards found in the Kivas of the pueblo and Anasazi and Mimbres pottery she studied in the Museum of New Mexico. Her work has been shown nationally and internationally, including at the Smithsonian State and City Museums, Princeton University and the Department of the Interior in Washington, D.C. For more information on Lucy Lewis and other Native American Women Potters, have a look at Pottery by American Indian Women by Susan Peterson. (Ceramics Today, http://www.ceramicstoday.com/articles/lewis.htm)

Midterm Study Image 2009/9 Mimbres Culture


New Mexico. Mimbres, Mogollon Culture. Bowl depicting a mythological scene of a crane swallowing a decapitated human head. 12.7 x 22.9 cm. CE 950-1150.

Mimbres Black-on-White is perhaps the most recognizable of the southwestern types of pottery, most likely because it is the only type which consistently bears figural subject matter. Animals, insects, fish, humans and mythological subjects are common. These beasts are usually highly conventionalized, and often resemble those found in pictographs, or rock art. Though many have studied these figures, no one has provided a convincing explanation of their meaning.Geometric motifs are just as common. These usually consist of a band of decoration extending partway into the bowl. Some bowls have allover decoration. Fine lines and relative intricacy distinguish this type from the earlier Mangas Black-on-White.

Midterm Study Image 2009/8 Roman Lead Glazed


Rome, Three vessels, lead glaze, mold-made with relief, 1 c. BCE-1 c CE

Three Roman vessels, all with vitreous glaze. Double-handled cup with applied scales CE 20-70, said to be from Arles, France; Double-handled vase c. CE 70-100, said to be from Tharros; singled-handled cup decorated with imbricated leaves, from Asia Minor, 1st. C CE. Height (tallest) 17.5 cm.

Such wares were regarded as luxury items. (note differences in place of origin, date)This form of drinking cup, with deep body and ring handles with thumb-rests, is known as a skyphos. It was a popular shape, made in metal, pottery and glass during the later Hellenistic and early Roman periods (about 150 BC- AD 100). The cup is covered by a thick glaze of lead silicate glass, which firing conditions turned a deep rich green on the exterior, and honey brown on the interior. The process of producing and firing such vessels was complicated by the adhesive nature of the glaze, which would bond itself to anything it touched in the kiln. The solution lay in firing the vessels upside-down, supported from the inside by three small prongs on a tall stand. The marks left on the interior are small, but drops of congealed glaze which formed when the vessel was inverted appear on the rim. Lead-glazed pottery was one of the few genuinely glazed ceramics of antiquity. At first they were almost certainly made in imitation of metal tableware. The earliest mass-produced and mould-made lead-glazed wares were made in Tarsus, Smyrna and other cities in Asia Minor from the late second century BC. From the late first century BC production centres were established in Italy, in the northern Adriatic and around Rome and Naples. From there the technique was exported to the Empire, from the Danube provinces to Gaul, Germany and Britain. Height: 7 cm ; Restoration can be highly deceptive. At first sight and even under careful scrutiny, this drinking vessel appears entirely preserved. However, under low magnification using a microscope, brush marks are visible on the handles. Under ultraviolet (UV) light, the two handles fluoresce a bright, light blue, showing that they had been painted, whereas the rest of the vessel was glazed. The paint indicates that the handles had been restored. It is not possible to tell from visual examination whether the handles are completely restored or if they are partly restored with heavy over-painting. This seems to be an example of intentional faking. However, the appearance of the handles is thought to be representative of how they may have originally looked. Since the restoration was not causing any damage to the pottery it was not removed. S. Buys and V. Oakley, The conservation and restoration of ceramics (Oxford, Butterworth Heinemann, 1993).